Howto configure default route and static route on HP ProCurve Switch

Howto configure default route and static route on HP ProCurve Switch

 

1. Static Routes configuration on HP Switch and default route

ip route 0.0.0.0 0.0.0.0 10.10.10.1
ip route 192.168.55.0 255.255.255.0 10.10.10.254
ip route 192.168.56.0 255.255.255.0 10.10.10.254
ip route 192.168.57.0 255.255.255.0 10.10.10.254
ip route 192.168.58.0 255.255.255.0 10.10.10.254
ip route 192.168.59.0 255.255.255.0 10.10.10.254
ip route 192.168.60.0 255.255.255.0 10.10.10.254
ip route 192.168.61.0 255.255.255.0 10.10.10.254
ip route 192.168.62.0 255.255.255.0 10.10.10.254

 

2. Show the routing table on HP Switch

HPSW#show ip route
IP Route EntriesDestination Gateway VLAN Type Sub-Type Metric Dist.
—————— ————— —- ——— ———- ———- —–
0.0.0.0/0 10.10.10.1 10 static 1 1
192.168.55.0 10.10.10.1 10 static 1 1
192.168.56.0 10.10.10.1 10 static 1 1
192.168.57.0 10.10.10.1 10 static 1 1
192.168.58.0 10.10.10.1 10 static 1 1
192.168.59.0 10.10.10.1 10 static 1 1
192.168.60.0 10.10.10.1 10 static 1 1
192.168.61.0 10.10.10.1 10 static 1 1
192.168.62.0 10.10.10.1 10 static 1 1

That’s all. Thanks for using IThelpblog.com.

 

 

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>